Round/Hex/Ball Shank Die Sets for YCP-240C Hand Crimper
Details
- Ball Dies - specifically designed for swaging Mil-Spec MS20664 Shank Ball Terminals & BA3 ball terminals from 0.8mm up to 5mm. Perfect for gym cable repair.
- Hexagon Dies - suitable for use with stainless swage fittings
- Round Dies - or "straight dies" - perfect for swaging ferrules
Provides strong reliable termination, once swaged the strength of the termination will be 90% of the minimum breaking load of the cable for MS20664-C2 to MS20664-C6 Shank Ball Terminals, and 50% of the minimum breaking load of the cable for BA3-1 to BA3-6 swage ball fittings, in line with EN Standard 13411-4:2011 (Terminations for steel wire ropes). Safety-critical applications should be verified via testing.
Please note that the YCP 240C comes with full Hex and Round die sets included. Ball Swaging Dies are sold separately.
For further information on selecting the correct die set for your fitting please see the Technical Info and Downloads tab on this page.
Applications & Advice
Dimensions
Video
Downloads
Technical Info
| Round Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240 | |||
| Die Type = Round | Fitting Types = Aluminium & Copper Ferrules & Stops | ||
 |  | ||
| TECNI Dies Marked | Cylindrical Diameter of Dies | Cable dia. for 7x7 & 7x19 steel core cable using aluminium or copper ferrules | Cable dia. for 6x7 & 6x19 fibre core cable using aluminium ferrules |
| 4.5AL-CU | 9mm | 4mm | |
| 5AL-CU | 10mm | 4.5mm | 5mm |
| 6AL-CU | 12mm | 5mm | 6mm |
| 6.5AL-CU | 13mm | 6mm | 6.5mm |
| 7AL-CU | 14mm | 6.5mm | 7mm |
| 8AL-CU | 16mm | 7mm | 8mm |
| 9AL-CU | 18mm | 8mm | 9mm |
| Hexagon Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240 | |||
| Die Type = Hexagon | Fitting Types = Stainless Swage Fittings with Round Shanks | ||
 |  | ||
| TECNI Dies Marked | Standard Stainless Steel Fitting Shank * Size (before swaging) | Standard Stainless Steel Fitting Size (after swaging - measure across flats a/f of hexagon) | Cable dia. for 7x7 & 7x19 steel core cable using stainless steel standard swage fittings |
| HEX-2-2.5-SS | 5.5mm | 4.8mm | 2mm/2.5mm |
| HEX-3-SS | 6.4mm | 5.5mm | 3mm |
| HEX-4-SS | 7.5mm | 6.4mm | 4mm |
| HEX-5-SS | 9.0mm | 7.9mm | 5mm |
| * The shank is the section of the fitting that is swaged with the dies | |||
| Ball Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240 | |||
| Die Type = Ball | Fitting Types = BA3 Type Ball Fitting & MS20664 Ball Shank Fitting | ||
 |  |  | |
| DIE-YCP240C-BALL-4.8 | 127.000.010, 127.000.012 & 127.000.015 (0.8mm, 1mm, 1.5mm - 1/32", 3/64" & 1/16" cable) | 127.206.642 (1.5mm & 1/16" cable) | |
| DIE-YCP240C-BALL-6.4 | 127.000.020 (2mm, 2.5mm, 5/64" & 3/32" cable) | 127.206.643 (2mm, 2.5mm, 5/64" & 3/32" cable) | |
| DIE-YCP240C-BALL-8 | 127.000.030 (3mm & 1/8" cable) | 127.206.644 (3mm & 1/8" cable) | |
| DIE-YCP240C-BALL-9.6 | 127.000.040 (4mm & 5/32" cable) | 127.206.645 (4mm & 5/32" cable) | |
| DIE-YCP240C-BALL-11.2 | 127.000.050 (5mm & 3/16" cable) | 127.206.646 (5mm & 3/16" cable) |