2mm A4-AISI 316 Stainless Steel Thin Walled Stop - 208.606.020
Details
TECNI 2mm 316 Stainless Steel Thin Walled Stop Ferrule.
Suitable for use with 1.8mm - 2mm cable.
End stops are not suitable for lifting applications. They are designed for suspension and locating purposes. The expected strength regarding this type of end termination is approximately 50% of the MBL of the wire rope. Testing must be performed to verify the strength of the assembly.
Stainless stop ferrules are best suited for use with Stainless Steel cable to avoid galvanic corrosion in saltwater environments.
Available in sizes 1 - 6
For support with manufacturing requirements, further help or information, please contact a member of our Sales Team.
Applications & Advice
For information only: When pressed in 2 plane's (opposite) using the Crimping Tool for Thin Walled Stainless Steel Stops and Bootlace Type Ferrules - 160.100.510. Pressed using impression marked 6 on the side. Failure load of stop recorded was 150 kgs.
Dimensions
Dimensions
a: 2.2mm
b: 4mm
L: 8mm
Technical Info
| Code | Fits Cable Diameter (mm) | Tool Used | a (mm) | b (mm) | L (mm) | Die Set Impression |
| 208.606.010 | 1 | 160.100.510 | 1.2 | 3 | 6 | 5 |
| 208.606.015 | 1.5 | 160.100.510 | 1.8 | 4 | 8 | 6 |
| 208.606.020 | 1.8 - 2 | 160.100.510 | 2.2 | 4 | 8 | 6 |
| 208.606.025 | 2.5 | 101.200.120 | 2.8 | 5 | 10 | 1.5/2 SS |
| 208.606.030 | 3 | 101.200.120 | 3.3 | 6 | 10 | 2.5 SS |
| 208.606.040 | 4 | 101.200.120 | 4.3 | 6 | 10 | 2.5 SS |
| 208.606.050 | 5 | 101.200.120 | 5.3 | 8 | 12 | 3.5 SS |
| 208.606.060 | 6 | 101.200.120 | 6.4 | 10 | 16 | 4 SS |