10mm 7x19 Galvanised Steel Cable MBL 7233kgs - 504.000.100
Details
- Minimum Breaking Load (MBL) : 7233kgs (70.93kN)
- Working Load Limit (WLL) : 1446kgs (14.18kN)
7x19 Galvanised Steel cable is ideal for use in indoor or outdoor applications. It is widely used in engineering applications offering a higher breaking load than the Stainless Steel alternative. The 7x19 construction cable is more flexible than a 1x19 and a 7x7 construction and better suited for running round pulleys.
Typical applications:
Lifting Applications: Wire rope slings and strops
Garden and DIY applications: Trellis, Catenary, Lighting, Suspension and Display, Shade sails
Garage Door cables
Control cables
Security cables and tagging
Fencing Rope
Cable unit of measure is in metres. Enter the quantity you require in the box & the cable will be supplied in one continuous length. Current pricing is based on available stock.
For support with manufacturing requirements, further help or information, please contact a member of our Sales Team.
Video
Downloads
Safe Use Data Sheet
Technical Info
The service life of cable and wire rope can be increased if (1) it operates over the largest possible pulley or sheave diameter, and (2) it is properly supported in the pulley or sheave groove. The working life of the individual wire strands is greatly reduced as the pulley or sheave diameter is diminished. The chart below shows minimum tread diameters over which various sizes and constructions of cable should operate.
RATIO OF CABLE DIAMETER TO PULLEY DIAMETER (D:d Ratio) | ||||||||
Desirable Minimum (mm) | Critical Minimum (mm) | |||||||
42:1 | 24:1 | 12:1 | 28:1 | 18:1 | 10:1 | |||
Cable Diameter in Inches | Cable Diameter in mm | 6x7 or 7x7 | 6x19 or 7x19 | 6x31 7x31 6x37 | 6x7 or 7x7 | 6x19 or 7x19 | 6x31 7x31 6x37 | |
1/32 | 0.8 | 34 | ---- | ---- | 22 | ---- | ---- | |
1 | 42 | ---- | ---- | 28 | ---- | ---- | ||
3/64 | 1.2 | 50 | 29 | ---- | 34 | 22 | ---- | |
1.5 | 63 | 36 | ---- | 42 | 27 | ---- | ||
1/16 | 1.6 | 67 | 38 | ---- | 45 | 29 | ---- | |
2 | 84 | 48 | ---- | 56 | 36 | ---- | ||
3/32 | 2.38 | 100 | 57 | ---- | 67 | 43 | ---- | |
3 | 126 | 72 | ---- | 84 | 54 | ---- | ||
1/8 | 3.2 | 134 | 77 | ---- | 90 | 58 | ---- | |
5/32 | 4 | 168 | 96 | ---- | 112 | 72 | ---- | |
3/16 | 4.8 | 202 | 115 | ---- | 134 | 86 | ---- | |
5 | 210 | 120 | ---- | 140 | 90 | ---- | ||
7/32 | 5.56 | 234 | 133 | ---- | 156 | 100 | ---- | |
6 | 252 | 144 | ---- | 168 | 108 | ---- | ||
1/4 | 6.35 | 267 | 152 | 76 | 178 | 114 | 64 | |
7 | 294 | 168 | ---- | 196 | 126 | ---- | ||
5/16 | 7.9 | 332 | 190 | 95 | 221 | 142 | 79 | |
8 | 336 | 192 | 96 | 224 | 144 | 80 | ||
9 | 378 | 216 | 108 | 252 | 162 | 90 | ||
3/8 | 9.5 | 399 | 228 | 114 | 266 | 171 | 95 | |
10 | 420 | 240 | 120 | 280 | 180 | 100 | ||
7/16 | 11 | 462 | 264 | 132 | 308 | 198 | 110 | |
12 | 504 | 288 | 144 | 336 | 216 | 120 | ||
1/2 | 12.7 | 533 | 305 | 152 | 356 | 229 | 127 | |
13 | 546 | 312 | 156 | 364 | 234 | 130 | ||
9/16 | 14 | 588 | 336 | 168 | 392 | 252 | 140 | |
5/8" | 16 | 672 | 384 | 192 | 448 | 288 | 160 | |
18 | 756 | 432 | 216 | 504 | 324 | 180 | ||
3/4 | 19 | 798 | 456 | 228 | 532 | 342 | 190 | |
20 | 840 | 480 | 240 | 560 | 360 | 200 | ||
7/8 | 22 | 924 | 528 | 264 | 616 | 396 | 220 |