TECNI YCP-240C Hydraulic Cable Crimping Hand Tool 4mm-8mm range - 101.200.240

Easy to use, compact and economical hydraulic crimper for securely crimping standard stainless steel swage fittings, copper ferrules, aluminium ferrules, stop ferrules and Mil-Spec fittings from 0.8mm (1/32") up to 4mm (5/32") onto compatible wire rope. 

The high-quality C-Shape crimping head rotates through 180 degrees allowing you to crimp comfortably in confined spaces with a pressing force of 12 tonnes. It has a two-speed action and is fitted with a safety value which automatically releases when the maximum pressure is reached. 

Once swaged the strength of the termination (cable end fitting) will be 90% of the minimum breaking load of the cable for the Ferrule Secured Eyes, Standard Stainless Swage Fittings with a shank & MS20664 Balls fitted on 7x7 & 7x19 construction wire ropes & 50% of the minimum breaking load of the cable for the BA3 Balls fitting on 7x7 & 7x19 construction wire ropes in line with EN Standard 13411-4:2011 (Terminations for steel wire ropes). Safety-critical applications should be verified via testing.

The swage tool comes in a hard-wearing plastic case with a range of TECNI designed, hardened dies, perfect for on-site repairs or in the workshop, allowing you to hand swage your cable assemblies quickly and easily. 

The following die sets are supplied with each tool suitable for pressing:

  • Code 2mm to Code 5mm hexagon dies for hexagonally swaging stainless steel standard swage fittings on 2mm to 5mm diameter steel cables.

  • Code 4.5 to Code 9 aluminium or copper ferrules for forming loops, soft eyes and thimble reinforced eyes in 4mm to 8mm diameter steel cable. Not Suitable for Crimping Stainless Steel Ferrules.

The following die sets are available for this tool but are not supplied as standard:
Ball & shank ball die sets suitable for the MS20644 Ball fittings, BA3 Ball Fittings and the Talurit Ball Shank Fittings from 0.8mm (1/32") up to 4mm (5/32") onto compatible wire rope. 

If you would like more information on our spares kits and hydraulic tool servicing please click here

£288.61
QtyPrice (per unit)
1 - 1£288.61
2 - 4£281.39
5 - 9£274.19
10 +£259.75
Product Code: 101.200.240

Applications & Advice

Recommended Grade of Oil: ISO 32 Hydraulic Oil 

Allen key supplied with the tool.

If you would like more information on our spares kits and hydraulic tool servicing please click here

Dimensions & Drawings

Length: 490mm

Width: (Head) 40mm

Carry Box: 545 x 120 x 200mm

Technical Info

Round Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240
   
Die Type = Round
Fitting Types = Aluminium & Copper Ferrules & Stops
  
  
    
TECNI Dies MarkedCylindrical Diameter of DiesCable dia. for 7x7 & 7x19 steel core cable using aluminium or copper ferrulesCable dia. for 6x7 & 6x19 fibre core cable using aluminium ferrules
4.5AL-CU9mm4mm 
5AL-CU10mm4.5mm5mm
6AL-CU12mm5mm6mm
6.5AL-CU13mm6mm6.5mm
7AL-CU14mm6.5mm7mm
8AL-CU16mm7mm8mm
9AL-CU18mm8mm9mm
    
Hexagon Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240
   
Die Type = Hexagon
Fitting Types = Stainless Swage Fittings with Round Shanks
  
  
TECNI Dies MarkedStandard Stainless Steel Fitting Shank * Size (before swaging)Standard Stainless Steel Fitting Size (after swaging - measure across flats a/f of hexagon)Cable dia. for 7x7 & 7x19 steel core cable using stainless steel standard swage fittings
HEX-2-2.5-SS5.5mm4.8mm2mm/2.5mm
HEX-3-SS6.4mm5.5mm3mm
HEX-4-SS7.5mm6.4mm4mm
HEX-5-SS9.0mm7.9mm5mm
    
 * The shank is the section of the fitting that is swaged with the dies  
    
Ball Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240
   
Die Type = Ball
Fitting Types = BA3 Type Ball Fitting & MS20664 Ball Shank Fitting
  
 
DIE-YCP240C-BALL-4.8127.000.010 (0.8mm, 1mm 1/32"& 3/64" cable)127.206.642 (1.5mm & 1/16" cable) 
DIE-YCP240C-BALL-4.8
127.000.012 (1.2mm, 1.25mm & 3/64" cable)
  
DIE-YCP240C-BALL-4.8
127.000.015 (1.5mm & 1/16" cable)
  
DIE-YCP240C-BALL-6.4127.000.020 (2mm, 2.5mm, 5/64" & 3/32" cable)127.206.643 (2mm, 2.5mm, 5/64" & 3/32" cable) 
DIE-YCP240C-BALL-8127.000.030 (3mm & 1/8" cable)127.206.644 (3mm & 1/8" cable) 
DIE-YCP240C-BALL-9.6127.000.040 (4mm & 5/32" cable)127.206.645 (4mm & 5/32" cable) 

Video