TECNI YCF-630 Hydraulic Cable Swager - Head Only - 101.630.000
Details
Tecni YCF-630 Hydraulic Cable Crimping Tool - Head Only
The YCF-630 complete tool offers a crimping force of 31.75 tonnes and a maximum working pressure of 700kgf/cm2 (10,000 psi)
The head for the tool comes in a steel carrying box. Tecni have a range of 8 TECNI designed, hardened dies suitable for use with this head.
The complete swaging tool is ideal for creating high strength, load rated steel wire rope assemblies from 5mm to 11mm diameter in the field.
Suitable for use with:
- YCP-900 Hydraulic Hand pump
- 3mm to 5mm Cable and Wire Rope requiring Hexagonally Swaged Stainless Steel Fittings
- Code 6 - 11 Copper Ferrules
- Code 6 - 12 Aluminium Ferrules
Not Suitable for Crimping Stainless Steel Ferrules.
Supplied with:
- YCF-630 Head
- Steel Carrying Case
Also available for this tool:
THE STANDARD DIES SUPPLIED WITH THE TOOL ARE NOT SUITABLE FOR USE WITH STAINLESS STEEL FERRULES
- Press Head without Dies = 15 kgs
- Press Head with Dies = 17 kgs
- Press Head with Dies and Steel Carrying Box = 31.5 kgs
Safety critical applications should be verified via testing.
Applications & Advice
TALURIT Aluminium and Copper Ferrules from size Code 2 (T2 or TCU2) and above finish at twice their size once correctly swaged. E.g. A Code 3 ferrule will finish at 6mm diameter and a code 12mm ferrule will finish at 24mm diameter.
Maximum working pressure of 700 kgf/cm2 (10,000 psi). Maximum swaging force on the dies = 31.75 tonnes (35 US ton)