Round/Hex/Ball Shank Die Sets for YCP-240C Hand Crimper
Details
- Ball Dies - specifically designed for swaging Mil-Spec MS20664 Shank Ball Terminals & BA3 ball terminals from 0.8mm up to 5mm. Perfect for gym cable repair.
- Hexagon Dies - suitable for use with stainless swage fittings
- Round Dies - or "straight dies" - perfect for swaging ferrules
Provides strong reliable termination, once swaged the strength of the termination will be 90% of the minimum breaking load of the cable for MS20664-C2 to MS20664-C6 Shank Ball Terminals, and 50% of the minimum breaking load of the cable for BA3-1 to BA3-6 swage ball fittings, in line with EN Standard 13411-4:2011 (Terminations for steel wire ropes). Safety-critical applications should be verified via testing.
Please note that the YCP 240C comes with full Hex and Round die sets included. Ball Swaging Dies are sold separately.
Applications & Advice
Dimensions
Video
Downloads
Technical Info
Round Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240 | |||
Die Type = Round | Fitting Types = Aluminium & Copper Ferrules & Stops | ||
TECNI Dies Marked | Cylindrical Diameter of Dies | Cable dia. for 7x7 & 7x19 steel core cable using aluminium or copper ferrules | Cable dia. for 6x7 & 6x19 fibre core cable using aluminium ferrules |
4.5AL-CU | 9mm | 4mm | |
5AL-CU | 10mm | 4.5mm | 5mm |
6AL-CU | 12mm | 5mm | 6mm |
6.5AL-CU | 13mm | 6mm | 6.5mm |
7AL-CU | 14mm | 6.5mm | 7mm |
8AL-CU | 16mm | 7mm | 8mm |
9AL-CU | 18mm | 8mm | 9mm |
Hexagon Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240 | |||
Die Type = Hexagon | Fitting Types = Stainless Swage Fittings with Round Shanks | ||
TECNI Dies Marked | Standard Stainless Steel Fitting Shank * Size (before swaging) | Standard Stainless Steel Fitting Size (after swaging - measure across flats a/f of hexagon) | Cable dia. for 7x7 & 7x19 steel core cable using stainless steel standard swage fittings |
HEX-2-2.5-SS | 5.5mm | 4.8mm | 2mm/2.5mm |
HEX-3-SS | 6.4mm | 5.5mm | 3mm |
HEX-4-SS | 7.5mm | 6.4mm | 4mm |
HEX-5-SS | 9.0mm | 7.9mm | 5mm |
* The shank is the section of the fitting that is swaged with the dies | |||
Ball Die Table for TECNI YCP-240C Hydraulic Cable Crimping Hand Tool - 101.200.240 | |||
Die Type = Ball | Fitting Types = BA3 Type Ball Fitting & MS20664 Ball Shank Fitting | ||
DIE-YCP240C-BALL-4.8 | 127.000.010, 127.000.012 & 127.000.015 (0.8mm, 1mm, 1.5mm - 1/32", 3/64" & 1/16" cable) | 127.206.642 (1.5mm & 1/16" cable) | |
DIE-YCP240C-BALL-6.4 | 127.000.020 (2mm, 2.5mm, 5/64" & 3/32" cable) | 127.206.643 (2mm, 2.5mm, 5/64" & 3/32" cable) | |
DIE-YCP240C-BALL-8 | 127.000.030 (3mm & 1/8" cable) | 127.206.644 (3mm & 1/8" cable) | |
DIE-YCP240C-BALL-9.6 | 127.000.040 (4mm & 5/32" cable) | 127.206.645 (4mm & 5/32" cable) | |
DIE-YCP240C-BALL-11.2 | 127.000.050 (5mm & 3/16" cable) | 127.206.646 (5mm & 3/16" cable) |