Crosby HG-228 Jaw/Jaw Galvanised 19.1mm x 457mm Turnbuckle WLL 2360 kgs - 221.032.732
Details
- Crosby Quality Tempered ends
- Excellent Fatigue Rating
- 5:1 Factor of Safety
- Certified for Lifting
- Galvanised corrosion resistant finish
Applications & Advice
This unit is NOT supplied with locking nuts. If these are required they must be ordered separately
RH:221.075.197
LH:221.075.570
HG-228 Turnbuckles are supplied with Nut & Bolt type safety pins from 6mm up to 16mm. Above this they are supplied with Pins & Cotters
RH:221.075.197
LH:221.075.570
HG-228 Turnbuckles are supplied with Nut & Bolt type safety pins from 6mm up to 16mm. Above this they are supplied with Pins & Cotters
Dimensions
A: 19.1mm
B: 24.6mm
E: 119mm
G: 38.5mm
J: 1155mm
K: 698mm
M: 1221mm
N: 764mm
BB: 471mm
B: 24.6mm
E: 119mm
G: 38.5mm
J: 1155mm
K: 698mm
M: 1221mm
N: 764mm
BB: 471mm