Con-Lock CLS 50 kgs WLL Concrete Anchor Cables Pack of 4 pcs
Details
- A unique packed quantity of this extremely versatile product.
- TECNI supply Zip-Lock cable suspension systems in 4 packs which cover almost any cable suspension requirement.
- The system consists of wire rope and zip-clip locking device with a CLA1 concrete anchor termination.
- The installed nail anchor expands automatically under load, pulls the cone into the expansion clip and expands against the wall of the concrete
- Tested cable suspension systems with a guaranteed working load rating.
- All Zip-Clip products have been independently tested by NEL/TUV, MELBTEST, NATA, SATRA, Lloyds British & Apave.
- All the clips are UL Certified.
Applications & Advice
Existing features capable of supporting a load of up to 50 kgs
Suitable for wrap around installations including:
• Beams
• Purlins
• Roof Trusses
Suitable for concrete applications including:
• Cracked concrete
• Reinforced concrete
• Slagged concrete
Suitable for wrap around installations including:
• Beams
• Purlins
• Roof Trusses
Suitable for concrete applications including:
• Cracked concrete
• Reinforced concrete
• Slagged concrete
Dimensions
Video
Downloads
Technical Info
• Key free release system
• No claw back required
• Nail anchor for hammer set installation
• The installed nail anchor expands automatically under load, pulls the cone into the expansion clip and expands against the wall of the concrete
• Can also be supplied with a double drop
• Shallow embedment
• ETA approved
• BS8539 Compliant
• High tensile galvanised wire 1960 N/mm2 grade 7x7
• BSEN 12385 standard
Installation Process
• Drill a 6mm hole to a minimum depth of 30mm
• Blow the hole clean of dust and debris
• Hammer in the fixing
• Anchor is now fixed, no claw back required
• Pass the wire through the zip-clip in the direction of the arrow
• Pass through or around your required suspension and back through the zip-clip leaving 15cm of wire protruding
• Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrows indicated.
• No claw back required
• Nail anchor for hammer set installation
• The installed nail anchor expands automatically under load, pulls the cone into the expansion clip and expands against the wall of the concrete
• Can also be supplied with a double drop
• Shallow embedment
• ETA approved
• BS8539 Compliant
• High tensile galvanised wire 1960 N/mm2 grade 7x7
• BSEN 12385 standard
Installation Process
• Drill a 6mm hole to a minimum depth of 30mm
• Blow the hole clean of dust and debris
• Hammer in the fixing
• Anchor is now fixed, no claw back required
• Pass the wire through the zip-clip in the direction of the arrow
• Pass through or around your required suspension and back through the zip-clip leaving 15cm of wire protruding
• Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrows indicated.