Code 1 TALURIT Aluminium Ferrule - 100.300.010

Perfect for use with cable diameters 0.8mm-1.1mm.
Applications include: security cables, tagging, lanyards, wire rope sling.

  • Aluminium ferrules are primarily used with galvanised wire rope but can be used with stainless steel in a non-marine environment.
  • Can be used for lifting.
  • Can be used with fibre core, rotation resistant, single core and steel core wire ropes.

A TALURIT aluminium ferrule secured eye termination (FSET) performed correctly will normally withstand a tensile strength of 90% of the minimum-breaking load (MBL) of the wire rope.
Note, however, that verifying tests should always be done in order to find out the strength.
Verifying tests should always be done in order to find out the strength.
Use the TECNI hand crimping tool (160.100.125) to press code 1 ferrules by hand or the TECNI YCP-120 for a hydraulic hand crimper (101.200.120).
Aluminium ferrules are primarily used with galvanised wire rope but can be used with stainless steel in a non-marine environment.

£0.06
QtyPrice (per unit)
1 - 99£0.06
100 - 999£0.05
1000 +£0.05
Product Code: 100.300.010

Applications & Advice

If required, flashing can be removed after pressing using side cutters. Do not press flashing back in as this will weaken the termination.

Dimensions & Drawings

L: 5mm
D1: 4.3mm
D2: 2.6mm
W1: 3mm
W2: 1.3mm
D3: 3mm 


Technical Info

Product Standard: BS EN 13411-3:2004+A1:2008 Terminations for steel wire ropes. Safety. Ferrules and ferrule-securing

Video