BA3-2 A2-AISI 304 Stainless Swage Ball Fitting 1.5mm (1/16") Cable - 127.000.015

  • The BA3 Series of plain ball end fittings meet all requirements for Boeing’s BACT14B Plain Ball End Fittings and NAS494 series Plain Ball End Fittings.
  • All balls are manufactured from stainless steel as specified in MIL-DTL 781 and are certified to the appropriate standard(s).
  • BOEING COMMERCIAL AIRCRAFT STANDARD: YES
  • NATIONAL AEROSPACE STANDARD: YES
  • MADE IN THE USA: YES
  • DFARS COMPLIANT: YES
  • Suitable for 1.5mm Cable (1/16")
  • Swage this yourself using our  YCP-240C Hydraulic Crimping Tool and the TECNI Ball Die Sets
£2.08
QtyPrice (per unit)
1 - 9£2.08
10 - 49£1.98
50 - 99£1.87
100 +£1.77
Product Code: 127.000.015

Dimensions & Drawings

Cable Dia: 1.59mm (1/16")
A: 5.31mm (0.209")
B: 1.91mm (0.075")
C: 3.53mm (0.139")
D: 0.53mm (0.021")
E: 1.98mm (0.078")
F Sphere Dia: 4.80mm (0.189")

Product Test Info

Test Results of BA3 Ball Terminals using single pressing action (pressed in one plane) with the YCP240C Hydraulic Crimp Tool. Using 3/64" stainless steel cable and BA3 Ball fitting 127.000.012, the fitting pulled off at 93 kgs - 205 lbs. Using 1/16" stainless steel cable and BA3 Ball fitting 127.000.015, the fitting pulled off at 107 kgs - 235 lbs.

Test Results of BA3 Ball Terminals using 2 pressing action with the YCP240C Hydraulic Crimp Tool. Using 3/64" stainless steel cable and BA3 Ball fitting 127.000.012, the assembly broke at 124kg, 273 lbs. Using 1/16" stainless steel cable and BA3 Ball fitting 127.000.015, the assembly broke at 171kg, 377lbs