4mm RH TECNI® Tensor Balustrade Straight Runs into Wood - 160.101.040

Right hand (RH), M6, TECNI® Tensor balustrade fitting with wood thread for use into wooden posts.

  • Quick tensioning and easy to install onsite.
  • Certified breaking load of 1200kgs.
  • 316 marine grade stainless steel fittings ensuring maintenance free.
  • Certified after documented testing by the University of Navarra, Spain. 

Designed, patented and manufactured in Spain in keeping with the most advanced technology. Certified with a known breaking load gives users complete confidence in the product and allows them to specify them into any drawing for suspension and tensioning applications. 

Applications include horizontal and vertical cable balustrade, infill wires, green wall systems, display and signage, architectural suspension and tensioning, lighting suspension and marine. 


Note:
 For each horizontal run into wood, a left hand and right hand fitting are needed.
To be used with Stainless Steel Cable only
£12.84
QtyPrice (per unit)
1 - 9£12.84
10 - 49£11.56
50 - 99£10.28
100 +£9.00
Product Code: 160.101.040

Applications & Advice

RIGHT HAND THREAD! IMPORTANT THIS PART IS NOT FOR LIFTING! USE FOR TENSIONING APPLICATIONS ONLY! Ideal for use where a high strength and known breaking load wire infill is critical. Approximate failure loads (fitting will pull off cable): 4mm 7x7 cable: 1200 kgs 4mm 7x19 cable: 1200 kgs

Dimensions & Drawings

Fits Cable Diameter: 4mm
D: 13mm
D1: 9.6mm
D2: 7.6mm
L: 53mm
L1: 40mm
L2: 13mm
G: M6 RH 
 

Technical Info

Video