4mm A4-AISI 316 Stainless Steel Thin Walled Stop - 208.606.040
Details
TECNI 4mm 316 Stainless Steel Thin Walled Stop Ferrule.
Suitable for use with 4mm cable.
End stops are not suitable for lifting applications. They are designed for suspension and locating purposes. The expected strength regarding this type of end termination is approximately 50% of the MBL of the wire rope. Testing must be performed to verify the strength of the assembly.
Stainless stop ferrules are best suited for use with Stainless Steel cable to avoid galvanic corrosion in saltwater environments.
Available in sizes 1 - 6
For support with manufacturing requirements, further help or information, please contact a member of our Sales Team.
Applications & Advice
For information only: When pressed using die marked 2/2.5 SS in 1 plane using the YCP120C and rotate to finish. The thin walled stop and 4mm 7x7 Stainless Steel cable was proof load tested in house to 220kgs.
Dimensions
Dimensions
a: 4.3mm
b: 6mm
L: 10mm
Technical Info
| Code | Fits Cable Diameter (mm) | Tool Used | a (mm) | b (mm) | L (mm) | Die Set Impression |
| 208.606.010 | 1 | 160.100.510 | 1.2 | 3 | 6 | 5 |
| 208.606.015 | 1.5 | 160.100.510 | 1.8 | 4 | 8 | 6 |
| 208.606.020 | 1.8 - 2 | 160.100.510 | 2.2 | 4 | 8 | 6 |
| 208.606.025 | 2.5 | 101.200.120 | 2.8 | 5 | 10 | 1.5/2 SS |
| 208.606.030 | 3 | 101.200.120 | 3.3 | 6 | 10 | 2.5 SS |
| 208.606.040 | 4 | 101.200.120 | 4.3 | 6 | 10 | 2.5 SS |
| 208.606.050 | 5 | 101.200.120 | 5.3 | 8 | 12 | 3.5 SS |
| 208.606.060 | 6 | 101.200.120 | 6.4 | 10 | 16 | 4 SS |