1mm A4-AISI 316 Stainless Steel Thin Walled Stop - 208.606.010
Details
TECNI 1mm 316 Stainless Steel Thin Walled Stop Ferrule.
Suitable for use with 1mm cable.
End stops are not suitable for lifting applications. They are designed for suspension and locating purposes. The expected strength regarding this type of end termination is approximately 50% of the MBL of the wire rope. Testing must be performed to verify the strength of the assembly.
Stainless stop ferrules are best suited for use with Stainless Steel cable to avoid galvanic corrosion in saltwater environments.
Available in sizes 1 - 6
For support with manufacturing requirements, further help or information, please contact a member of our Sales Team.
Applications & Advice
For information only: 1mm stainless steel cable wit this stop pressed in 2 plane's (Opposite) using the Crimping Tool for Thin Walled Stainless Steel Stops and Bootlace Type Ferrules - 160.100.510. Pressed using impression marked 5 on the side. The cable broke at 80 kgs.
Dimensions
Dimensions:
a: 1.2mm
b: 3mm
L: 6mm
Technical Info
| Code | Fits Cable Diameter (mm) | Tool Used | a (mm) | b (mm) | L (mm) | Die Set Impression |
| 208.606.010 | 1 | 160.100.510 | 1.2 | 3 | 6 | 5 |
| 208.606.015 | 1.5 | 160.100.510 | 1.8 | 4 | 8 | 6 |
| 208.606.020 | 1.8 - 2 | 160.100.510 | 2.2 | 4 | 8 | 6 |
| 208.606.025 | 2.5 | 101.200.120 | 2.8 | 5 | 10 | 1.5/2 SS |
| 208.606.030 | 3 | 101.200.120 | 3.3 | 6 | 10 | 2.5 SS |
| 208.606.040 | 4 | 101.200.120 | 4.3 | 6 | 10 | 2.5 SS |
| 208.606.050 | 5 | 101.200.120 | 5.3 | 8 | 12 | 3.5 SS |
| 208.606.060 | 6 | 101.200.120 | 6.4 | 10 | 16 | 4 SS |
Test Data
Break / proof Destruct tested to 60kgs | Comments Using 1mm 7x7 Stainless Steel Cable Catalogue Code 603.000.010 the Stop fitting pulled off at 60kgs using 1mm A4-AISI 316 Stainless Steel Thin Walled Stop - 208.606.010. Stop was pressed in one plane, using Dies marked ‘Impression 5’ In bootlace crimp tool 160.100.510 | Tool Used Bootlace Crimp Tool | Test Machine Mecmesin 2.5kN |